LOG ON REQUIRED!!

 

Sorry, but the menu you just clicked is non-operational for anyone who is not logged in. Already a member? Log on here. Not a member? Register here. There's lots to see and do once you are signed in!

Subscription required!

 

The Wiki and the VIN Decoder are accessible by subscribed members only. If you are subscribed, you can also choose to hide the WIKI/VIN panel and Quick Links menu

If you would like to subscribe, or simply see more information about subscribing, please click here

 

Edit your...

 
 

Find my posts

 
 

PM Options

 
 

Edit your...

 
 

View Memberlist by....

 
 

QUICK LINKS

Clutch hydraulics

Info on all the projects 75 & ZT Enthusiasts are currently involved with...

Clutch hydraulics

Post Number:#1  Post by Zeb » October 6th, 2013, 1:30

The current system for the clutch hydraulics is pretty grim in the long term. A plastic master cylinder that wears and leaks and a largely plastic slave which also wears / disintegrates...When the master wears the guk it produces then finds its way down to the slave and increases wear too. If you are lucky the master, the slave and the clutch all wear out together at circa 80-100k miles...some don't last half this distance.

Since conversion to a mechanical system looks like being a rather ambitious solution, the answer is perhaps to have far higher quality precision-machined from aluminium billet replacement parts which are in themselves re-buildable. This would allow the long term owner much greater peace of mind and also the option to buy a re-build kit to keep in stock should it ever become a problem again. All of this would also need to ideally be at a lesser cost than the current offerings from Delphi or LUK. Of course, having a flexible, braided metal hose connector might also be a bonus for the fitting of these too....this will also be part of the package.

The Tazu part is an improvement but appears to be 'handed' for left-hand drive vehicles* and consequently poses a few fitting difficulties currently. It is also only half the answer in any case.

We think we may have the answer to this.....so watch this space! :fingers:

*See below...this issue appears to have been resolved.
User avatar
Zeb
Site Admin
 
Posts: 12008
Member No: 2
Joined: May 19, 2012
Location: Edge of the Lincolnshire Wolds
Zeb's car profile

Re: Clutch hydraulics

Post Number:#2  Post by humphshumphs » October 6th, 2013, 1:54

Have looked on their website, and they list a LHD and a RHD version now.
Richard.
User avatar
humphshumphs
 
Posts: 317
Member No: 122
Joined: Jul 20, 2012
Location: Lowestoft
Region: Suffolk and Cambridgeshire
humphshumphs's car profile

Re: Clutch hydraulics

Post Number:#3  Post by Zeb » October 6th, 2013, 1:55

Ah ok...cheers Richard!
User avatar
Zeb
Site Admin
 
Posts: 12008
Member No: 2
Joined: May 19, 2012
Location: Edge of the Lincolnshire Wolds
Zeb's car profile

Re: Clutch hydraulics

Post Number:#4  Post by Bolin » October 6th, 2013, 11:39

Tazu are developing an aluminium slave. Can we link up with them in some way, like the OC have?
One of Britain's Fine Cars
User avatar
Bolin
Rep for Hampshire
 
Posts: 1909
Member No: 64
Joined: Jul 04, 2012
Location: N. E. Hampshire
Region: Hampshire
Bolin's car profile

Re: Clutch hydraulics

Post Number:#5  Post by Zeb » October 6th, 2013, 11:41

Possibly...but at the moment we think that an aluminium slave that has been tried and tested has already been developed elsewhere.
User avatar
Zeb
Site Admin
 
Posts: 12008
Member No: 2
Joined: May 19, 2012
Location: Edge of the Lincolnshire Wolds
Zeb's car profile

Re: Clutch hydraulics

Post Number:#6  Post by Jake » October 7th, 2013, 2:40

Bolin wrote:Tazu are developing an aluminium slave. Can we link up with them in some way, like the OC have?


Feel free to drop them an invite Colin, we have just fitted one of their parts to one of our projects after all! :-)
2005 ZT-T 180 Sports Auto SE - Rio Red
1999 Rover 75 Connoisseur SE - Dorchester Red
2004 Rover 75 Contemporary SE Tourer - Royal Blue
User avatar
Jake
Site Admin
 
Posts: 6289
Member No: 1
Joined: May 19, 2012
Location: Hitchin
Region: Lincolnshire and Norfolk
Jake's car profile

Re: Clutch hydraulics

Post Number:#7  Post by Bolin » October 8th, 2013, 11:37

I'll see about doing that in the next week or so :)
One of Britain's Fine Cars
User avatar
Bolin
Rep for Hampshire
 
Posts: 1909
Member No: 64
Joined: Jul 04, 2012
Location: N. E. Hampshire
Region: Hampshire
Bolin's car profile

Clutch hydraulics

Post Number:#8  Post by Isle of Wight » July 9th, 2014, 12:26

Just had the Tazu master slave fitted right hand drive version, it cost £75.
Unfortunately it hasnt solved my problem and am finding it difficult to change gears. I've had the gearbox, clutch, slave and finally master replaced but it's still the same.
I'm new on here and cant find where I can make a post.
User avatar
Isle of Wight
 
Posts: 1
Member No: 800
Joined: Jul 09, 2014
Location: Isle Of Wight
Isle of Wight's car profile

Clutch hydraulics

Post Number:#9  Post by Mr Hyde » July 9th, 2014, 3:58

Hi Jason and welcome!

For the issue in question, this seems as good a place as any to post. For other Tazu references, do a search or click here

If you want to introduce yourself, then this is the forum you want!

:D
Dave Hyde
User avatar
Mr Hyde
Site Admin
 
Posts: 14052
Member No: 3
Joined: May 20, 2012
Location: East Midlands
Region: Lincolnshire and Norfolk
Mr Hyde's car profile


Return to Current 75 & ZT Enthusiasts Projects



Users browsing this forum: No registered users and 1 guest

Subscription is required!

 

The Wiki and the VIN Decoder are accessible by subscribed members only. If you are subscribed, you can also choose to hide the WIKI/VIN panel and Quick Links menu

If you would like to subscribe, or simply see more information about subscribing, please click here